Sichuan Meishan Shanbao Machine Mould Co., Ltd.
Sichuan Meishan Shanbao Machine Mould Co., Ltd.
Add to Cart
Introduction:
Shanbao Machinery, founded in 1989, is a large-scale professional feed machinery fittings manufacturer, that integrates production, sales, and service. The headquarter is located at the new zone of Meishan Industrial Park, Sichuan, China. Covering an area of 40000sq.m with 3 plants for forging and casting, drilling and fine turning. Most workers have more than 30 years of experience in machinery production. Besides, we’re the only dies manufacturer who has its own forging and casting factory in China, it means we can control the quality from the beginning.
The hammer mill beaters are used to crush and grind materials that are fed into the hammer mill. The beaters are mounted on bars and rotate together with the shafts at high speed. The beater strikes the material, breaking it down into smaller particles when the shaft rotates. The beater is the most important part of the hammer mill and the easiest wearing-out part. The beater's shape, size, arrangement, and production quality have a big impact on the grinding efficiency and finished product quality. The high-speed-running beater's machining accuracy has a great effect on the balance of the rotor of the hammer mill.
Product Description:
Material:
Low alloy high strength structural steel Q345 is chosen as the hammer's substrate, and its hardness can reach 55 to 60HRC through a special process. This kind of treatment will effectively prevent the material from abrasion. The angular hardness can reach the hardness of 62-70HRC by utilizing tungsten carbide in the arm surface to ensure it is wear-resistant.
This kind of raw material has been proved by our wide customers that Q345 is highly efficient and has a long lifespan. Besides, we can adjust the stacking welding form and thickness of the tungsten carbide to meet the customer's different requirements about the material crushing conditions.
How To Provide High-Quality Hammers?
1. Timely test of the hammer's materials.
2. Seriouly control the size, only the hammer's sizes are within GB4381-87 and can be delivered. The gap difference between the aperture and the pin roll is less than 0.5mm
3. Strictly stacking the weld according to the drawings
4. The group weight difference is being controlled within 5g. Since the small weight difference between groups will have little vibration and
could protect the host equipment well.
Packing:
Production Process:
Exhibition: